Products, Print & print with frame – DNP DS-Tmini Kiosk Order Terminal User Manual
Page 141
Photo Editing Software User Manual
141
6.
Select the printer which is going to handle panoramic prints when that product type is selected.
Attention:
Only one panoramic printer can be assigned for a DS620 or DS820.
The software displays the panoramic printer serial-number and its media type for selection purpose.
The software will display a warning message when there are an insufficient number of panels for Panoramic
print(s).
When there are no panoramic prints in an order, both the DS620 and the DS820 are used to fullfil the
submitted order.
Products
Use this section to add or remove products from the system.
1.
From the Configuration page, select the
Products
button.
2.
Click the
Edit
button.
3.
Enter any necessary details or parameters.
4.
Press
OK
to save your changes.
Print & P
r
int with Frame
•
Enable or disable print sizes as necessary.
•
Print sizes are shown based on the printer attached
and the media size loaded.
•
Print finish types by default have a finish type of
manual so the customer can select from a list of
available finish types.