DNP DS-Tmini Kiosk Order Terminal - Manual (Page 139)

Photo Editing Software User Manual
139
4. Press the Edit button. The Color Corrections for Specific Printers box will appear.
Description of the screen settings:
• High Density Mode on Supported Printers : If set to True, high density mode is used when printing
(currently available for DS820 printers only).
• Apply This Color Correction : If enabled, color correction is applied to anything printed using this
printer and this color profile.
• Color Profile : Opens a browse window so you can select your preferred color profile for this printer
and this finish type.
• Auto Color : Automatically correct color and density for prints used with this printer and finish type.
• Auto Contrast : Automatically corrects contrast for images printed with this printer and finish type.
• Auto Levels : Autmatically corrects color levels in images printed with this printer and finish type.
• Brightness, Contrast, Saturation, Red, Green, Blue, Gamma, Sharpen Controls : Adjust each channel
as needed to make fine adjustments to the printer channel outputs. Set the value to 0 if no correction
needs to be applied.
Panoramic Printer:
When two printers of DS 620 or DS 820 are connected with Snap Lab system, the PES provides the possibility
to assign a “Panoramic Printer” where panoramic prints printed on the assigned printer.
How to assign a “Pano Printer”?
1. Ensure that the system has been connected with two (2) printers, a DS620 and/or a DS820.
2. The printers must be turned ON.
3. From the Admin screen, click the Settings button.