RED DIGITAL CINEMA V-RAPTOR 8K VV DSMC3 Camera (RF, Black) - Manual (Page 99)

RESOLUTION
Use resolution to select one of the following SDI port resolution settings:
• 1080p
• 2K DCI
• 4K UHD
• 4K DCI
The resolution selected here controls the SDI output resolution of the preview
page.
SCALING PREVIEW
When monitoring in 1080p or 4K UHD while capturing in a 17:9 format, the entire 17:9 image will be down-scaled to the
16:9 aspect ratio of 1080p or 4K UHD. Small black bars will only appear on the top and bottom of the frame in the
monitor path and not on the recorded image.
DISPLAY PRESET
Use Display Preset to select gamma of the displayed preview image for the SDI
ports:
SDR - Standard Dynamic Range (default)
HDR - High Dynamic Range
HLG - Hybrid Log-Gamma
When shooting in R3D format, the camera stores this as metadata, which you can
adjust non-destructively in post production after filming.
The Display Preset allows you to select the gamma for the camera preview and monitor output.
Each monitor is designed to display using a specific gamma. Most monitors use SDR. However, some support HDR
and HLG gamma signals. Select the display preset that works best with your monitor.
LOOK
You can select the look of the image preview signal sent to the SDI
port.
The selections include:
• REDWideGamutRGB / Log3G10
• Image / LUT (default)
GUIDES
Use Guides to enable or disable the viewing of guides. You can enable and disable guides by pressing SEL to toggle
Guides to the right (green / enabled) and to the left (red / disabled).
COPYRIGHT © 2021 RED.COM, LLC 955-0198, V1.1, REV. A | 92
V-RAPTOR™ 8K V V OPERATION GUIDE