Power, Attaching the battery, Removing the battery – RED DIGITAL CINEMA V-RAPTOR 8K VV DSMC3 Camera (RF, Black) User Manual
Page 178: Power components, V-raptor™ 8k v v operation guide
POWER
ATTACHING THE BATTERY
Insert a compatible V-Lock battery (refer to
) in the battery slot. Slide the battery until it clicks.
The camera can charge the battery while it is attached to the camera, the camera is off, and the DC power adaptor is
connected. The DC Power LED blinks amber until communication is established with the battery. The LED is solid
amber when communication is established and the battery is charging. The LED is green when communication is not
established (incompatible battery) and the battery is not charging.
NOTE:
Incompatible batteries will not charge on the camera.
REMOVING THE BATTERY
1. While holding the attached battery, press the
Eject Button
.
2. Lift the battery out.
POWER COMPONENTS
You can power the V-RAPTOR 8K V V camera with the RED
, an External DC Power
Source, or with the rear-mounted
.
For information about charging, storing, or maintaining the batteries, refer to the manufacturer's instructions.
COPYRIGHT © 2021 RED.COM, LLC
955-0198, V1.1, REV. A | 171
V-RAPTOR™ 8K V V OPERATION GUIDE