V-raptor™ 8k v v operation guide – RED DIGITAL CINEMA V-RAPTOR 8K VV DSMC3 Camera (RF, Black) User Manual

Page 203

During the upgrade, the fans run at high speed and the following occurs:

The camera displays the

SHUTTING DOWN

screen and reboots

The camera restarts and displays the

UPGRADING

screen

The camera displays the

INITIALIZING

screen

The camera displays the

FIRMWARE UPGRADE

progress screen:

The Firmware Upgrade success message screen displays with a

RESTART

button:

10. Press the button under

RESTART

. The camera displays the

SHUTTING DOWN

screen and reboots again.

11. The camera restarts displaying the V-RAPTOR 8K V V start screen, the

INITIALIZING

screen, and then the Software

License Agreement (SLA) displays:

12. Press the button under

Agree

. If you do not agree to the SLA, the camera cannot be used. The SLA continues to

display until it is accepted.

13. Recalibrate the camera before recording. Refer to the

section and

for more

information.

955-0198, V1.1, REV. A | 196

V-RAPTOR™ 8K V V OPERATION GUIDE