V-raptor™ 8k v v operation guide – RED DIGITAL CINEMA V-RAPTOR 8K VV DSMC3 Camera (RF, Black) User Manual
Page 37
RGB Exposure Meter displays the quantity of over or under exposed pixels in each of the separate red, green, and blue
channels.
The top and bottom RGB lights illuminate when a small amount of pixels on the sensor are overexposed or
underexposed. This indicates that a small number of pixels in the image are too bright and will not contain any detail, or
are too dark and will appear as noise.
The bars show the quantity of overexposed and underexposed RGB pixels on the sensor. Adjust the settings in the
camera such as Iris, or shutter speed to compensate, or change the scene's lighting for the best balanced image.
CAMERA DESIGNATION AND REC INDICATOR
The Camera Designation and Record indicator on the LCD home page displays the camera letter assigned to the
camera (refer to
and
). The color of this area indicates when the camera recording is ready (black), when
the camera is recording (red), and when the recording is stopped and the camera is adding the pre-recording (yellow).
Recording:
Adding Pre-Recording:
TIMECODE / EDGECODE
The Timecode / Edgecode section displays the timecode or edgecode (refer to
).
Timecode:
Edgecode:
This text turns red when the camera is recording.
COPYRIGHT © 2021 RED.COM, LLC
955-0198, V1.1, REV. A | 30
V-RAPTOR™ 8K V V OPERATION GUIDE