RED DIGITAL CINEMA V-RAPTOR 8K VV DSMC3 Camera (RF, Black) - Manual (Page 181)

TURNING OFF THE CAMERA
NOTE: The camera stops recording and turns off automatically when the supply voltage drops to 11.5 V.
NOTE: Do not turn off the camera while the camera is recording or formatting media.
Slide the Power Switch down to the OFF position.
MEDIA MANAGEMENT
This section explains how to use, record, format, and offload media for the camera.
WARNING: Do not attach a label to the CFexpress media card. The heat generated by the media can weaken the
label's adhesive, causing the label to detach inside of the camera. Labels can also diminish heat dissipation and cause
excessive wear to the internal components. Removing a label from a CFexpress media card can possibly deform the
card body.
The camera supports exFAT as the file system for the media card to accommodate larger files and data rates. exFAT is
supported both on macOS and MS Windows.
EJECTING MEDIA
IMPORTANT: To ensure data integrity, media must always be ejected prior to removal from the camera. This ensures
that power is removed from the media and any open data files are closed. Failure to properly eject media may result in
lost data or corrupted files.
To eject media from the camera, use the LCD and select Menu > Media .
COPYRIGHT © 2021 RED.COM, LLC 955-0198, V1.1, REV. A | 174
V-RAPTOR™ 8K V V OPERATION GUIDE