Calibrate, V-raptor™ 8k v v operation guide – RED DIGITAL CINEMA V-RAPTOR 8K VV DSMC3 Camera (RF, Black) User Manual

Page 152

Text mode
Original mode

CALIBRATE

Use Calibrate to start the camera calibration process and create your User calibration profile.

Only calibrate the camera after it has reached its operational temperature. This occurs usually within ten minutes after
you turn on the camera in the filming environment. Do not calibrate immediately after powering on.

NOTE:

Make sure that the mount cap is installed on the camera before you calibrate the camera.

Press the button below OK to begin calibrating the camera.

When the camera is finished calibrating, the LCD displays the Calibration status message:

or:

955-0198, V1.1, REV. A | 145

V-RAPTOR™ 8K V V OPERATION GUIDE