RED DIGITAL CINEMA V-RAPTOR 8K VV DSMC3 Camera (RF, Black) - Manual (Page 221)

6-PIN DC-IN
The male 6-Pin 1B DC-IN connector accepts DC input power from 11 V DC to 17 V DC. A built-in
power conditioner protects against reverse-polarity connections, electrostatic discharge (ESD),
undervoltage, overvoltage, and overcurrent.
WARNING: Both pairs of +VBATT and GROUND pins must be wired. Using a third-party power
cable that wires only one (1) pair of +VBATT and GROUND pins may damage the power supply
or the camera. Damage to the power supply or other components of the camera system caused
by using an inappropriate power cable is not covered under warranty.
Figure: Front face of the male 6-pin 1B DC power input connector (looking at the back of the
camera).
6-PIN 1B DC INPUT CONNECTOR
PIN SIGNAL DESCRIPTION
1 +VBATT Power input, +11.5 to +17 V DC
2 +VBATT Power input, +11.5 to +17 V DC
3 SCL-BATT Battery SMBus SCL signal (3.3 V)
4 GROUND Power return (camera ground)
5 GROUND Power return (camera ground)
6 SDA-BATT Battery SMBus SDA signal (3.3 V)
NOTE: Mating connector is FGJ.1B.306.CWLD72Z.
COMPATIBLE CABLES
790-0638 : DSMC AC Power Adaptor Pack
790-0164 : XLR Power Cable (10')
790-0291 : DSMC Battery Belt Clip
COPYRIGHT © 2021 RED.COM, LLC 955-0198, V1.1, REV. A | 214
V-RAPTOR™ 8K V V OPERATION GUIDE