RED DIGITAL CINEMA V-RAPTOR 8K VV DSMC3 Camera (RF, Black) - Manual (Page 207)

COPYRIGHT © 2021 RED.COM, LLC 955-0198, V1.1, REV. A | 200
STATUS ICONS
The following is a table of the camera's status icons.
ICON DETAILS
The CFexpress media card is good and recording time remaining
The CFexpress media card is missing
The CFexpress media card is incompatible
The sensor temperature (T) and exposure (E) calibration are good
The sensor temperature (T) requires calibration
The sensor exposure (E) requires calibration
Gray indicates that no Timecode generator signal is detected
Green indicates that the Timecode source is connected and jammed
Red indicates that the Timecode source is connected and not jammed
White indicates that the Timecode source is jammed and not connected
Yellow indicates that the Timecode source is cross-jammed (at a different Project Time Base )
Gray indicates that no Genlock signal is detected
Green indicates that the camera is receiving and is locked to a Genlock signal
Red indicates that the camera is receiving and is not locked to a Genlock signal
Gray indicates that no synchronization is detected
Green indicates that the camera's sensor is synchronized with Timecode and that the camera's output
is synchronized with a Genlock signal
Yellow indicates that the camera's sensor is NOT synchronized with Timecode and that the camera's
output is synchronized with a single camera or a Genlock signal
Camera temperature is good
Camera overheating warning
Camera overheating
Camera shutting down
Gray indicates no FTPS data is transferring
V-RAPTOR™ 8K V V OPERATION GUIDE