RED DIGITAL CINEMA V-RAPTOR 8K VV DSMC3 Camera (RF, Black) - Manual (Page 95)

TIMECODE DISPLAY MODE
Use Timecode Display Mode to configure the Timecode display type that the camera applies to the recordings.
You can set the Timecode Display Mode as Time of Day (TOD) or Edge.
TOD DISPLAY MODE
Time of Day (TOD) display mode displays the Timecode as the time of day that the frame was recorded.
EDGE DISPLAY MODE
Edge display mode displays the Timecode as the sequential recording time that has elapsed starting with the first
frame.
MONITORING MENU
The Monitoring menu contains the settings you use to configure your camera monitoring options.
From the LCD menu, navigate to Monitoring and press SEL:
Use the Monitoring menu to configure the monitoring settings:
ITEM DETAILS
Top LCD Monitoring tools for the top LCD
SDI 1 / 2 SDI port resolution, frequency, look, guides, tools, overlay, and overlay mode
Live Stream Enable or disable Wi-Fi live streaming
Tools Various monitoring tools including False Color , Peaking , and Zebra Modes
Guides Frame guides and a center guide
COPYRIGHT © 2021 RED.COM, LLC 955-0198, V1.1, REV. A | 88
V-RAPTOR™ 8K V V OPERATION GUIDE