RED DIGITAL CINEMA V-RAPTOR 8K VV DSMC3 Camera (RF, Black) - Manual (Page 63)

ISO
Use the ISO setting to adjust the image’s brightness in the monitoring path.
The ISO range is ISO 250 to ISO 12,800. The default ISO is ISO 800.
Higher ISO values create brighter images in the monitor path, and lower ISO values create darker images in the monitor
path.
When you record, the ISO settings are stored as metadata and you can adjust them non-destructively in post-
processing with REDCINE-X PRO or other editing tools that support R3D files.
RED recommends setting the ISO to the default of 800, then adjusting the aperture and lighting to match. You can
adjust the ISO later for fine-tuning.
SHUTTER
Use Shutter to select the exposure time (shutter speed / shutter angle). You can change the shutter settings while
recording.
You can switch between angle and time by using the Status Settings or by pressing and holding the button above
SHUTTER on the Home Page (refer to Home Page ).
Decreasing shutter speed increases the amount of time that light hits the sensor, which increases exposure and motion
blur of moving objects. Increasing shutter speed decreases the amount of time that light hits the sensor, which
decreases exposure and motion blur of moving objects.
COPYRIGHT © 2021 RED.COM, LLC 955-0198, V1.1, REV. A | 56
V-RAPTOR™ 8K V V OPERATION GUIDE