Inserting media, V-raptor™ 8k v v operation guide – RED DIGITAL CINEMA V-RAPTOR 8K VV DSMC3 Camera (RF, Black) User Manual

Page 183

INSERTING MEDIA

The camera contains a covered compartment on the left side where you insert the CFexpress media card.

WARNING:

Do not attach a label to the CFexpress media card. The heat generated by the media can weaken the

label's adhesive, causing the label to detach inside of the camera. Labels can also diminish heat dissipation and cause
excessive wear to the internal components. Removing a label from a CFexpress media card can possibly deform the
card body.

INSERTING THE CFEXPRESS MEDIA CARD

1. Press the media door access latch down, and open the media door.

2. Insert the CFexpress media card in the slot with the top of the card facing toward the front of the camera. Insert the

card until the lock clicks.

3. Close the media door and make sure that the door latch clicks.

4. If needed, format the CFexpress media card. Refer to

Secure Format

for more information.

955-0198, V1.1, REV. A | 176

V-RAPTOR™ 8K V V OPERATION GUIDE