Headphone, V-raptor™ 8k v v operation guide – RED DIGITAL CINEMA V-RAPTOR 8K VV DSMC3 Camera (RF, Black) User Manual

Page 93

SOURCE

Use Source to select the type of input connected to external audio channel 3 and 4 ports.

You can select microphone, line, or +48V phantom power.

The default setting is microphone (Mic).

LIMITER

When enabled, use the limiter to place a limit past which the audio level for channels 3 and 4 cannot exceed.

You can select from -2.0 to -12.0 Decibel Full Scale (dBFS) as the limit.

The default limit is -6.0 dBFS.

HEADPHONE

Use the Headphone settings to enable the headphone jack and to adjust the headphone volume.

You can enable and disable the headphone audio jack by pressing SEL to toggle Enable to the right (green / enabled)
and to the left (red / disabled).

955-0198, V1.1, REV. A | 86

V-RAPTOR™ 8K V V OPERATION GUIDE