Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) - Manual (Page 99)

Studio Display
073-00335-A | 99 © 2022 Apple Inc. All rights reserved.
Cables | Reassembly
24. Position the ambient light
sensor flex cable in the
channel in the right speaker.
25. Slide each end of the
ambient light sensor flex
cable into the connectors
on the display. Then use
the black stick to flip down
the locking levers. Press the
polyester film tabs to adhere
them to the ends of the flex
cable.
26. Run the flat end of the black
stick along the length of
the ambient light sensor
flex cable to adhere it to the
display.
• Power supply boards
• Display (stand) or display (VESA mount adapter)
Reinstall the following parts to complete reassembly: