Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) User Manual

Page 98

Studio Display

073-00335-A | 98

Cables | Reassembly

20. Position the DisplayPort

power/signal cable bundle

in the channel in the right

speaker.

21. Slide the end of the

DisplayPort power cable

into the connector on the

logic board (1).

22. Slide the end of the

DisplayPort signal flex cable

into the connector on the

logic board (2). Then use

the black stick to flip down

the locking bar (3).

23. Run the flat end of the

black stick along the

length of the cable to

adhere it in the channel on

the right speaker (4).