Reassembly – Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) User Manual

Page 95

Studio Display

073-00335-A | 95

Cables | Reassembly

Reassembly

1. Position the left fan flex

cable in the housing as

shown.

2. Slide the end of the left fan

flex cable into the connector

on the logic board. Use the

black stick to flip down the

locking lever. Then press the

polyester film tab to adhere

it to the end of the flex

cable.

3. Run the flat end of the black

stick along the length of the

left fan flex cable to adhere

it to the housing.

4. Follow the reassembly steps to reinstall the

5. Position the microphone

flex cable in the housing as

shown.

6. Slide one end of the

microphone flex cable

into the connector on the

microphone. Ensure that the

flex cable is fully inserted.

Then press the polyester

film tab to adhere it to the

end of the flex cable.

7. Slide the other end of the

microphone flex cable into

the connector on the logic

board. Ensure that the cable

is fully inserted. Then press

the polyester film tab to

adhere it to the end of the

flex cable.

8. Run the flat end of the black stick along the length of the flex cable to adhere it to the housing.