Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) - Manual (Page 87)

Studio Display
073-00335-A | 87 © 2022 Apple Inc. All rights reserved.
20. Position the logic board bus
bar between the logic board
and DC power supply board.
Then use the T6 screwdriver
to partially reinstall the four
T6 screws (923-07141).
21. Keep the Torx T6 bit in the
10–34 Ncm adjustable
torque driver. Ensure that
the torque value is still set to
20.5 Ncm.
Power Supply Boards | Reassembly
22. Use the adjustable torque
driver and Torx T6 bit to fully
reinstall the four T6 screws.
Ensure that the hooks
on the bus bar align with
the notches on the logic
board as shown.
Important