Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) User Manual

Page 119

Studio Display

073-00335-A | 119

9. Ensure that the torque value

is still set to 3.5 Nm. Use the

adjustable torque wrench

and 20IP bit to partially

reinstall the two 20IP screws

to 3.5 Nm as shown.

8. Remove the two alignment

pins. Then use the

adjustable torque wrench

and 20IP bit to partially

reinstall two 20IP screws

(452-06708) as shown.

Tilt-Adjustable Stand | Reassembly

Note: The alignment pins

may get stuck. If they do,

use a flathead screwdriver

to remove the alignment

pins.