Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) User Manual
Page 50
Studio Display
073-00335-A | 50
© 2022 Apple Inc. All rights reserved.
Logic Board | Removal
5. Use the T6 screwdriver to
remove the four T6 screws
(923-07141) from the logic
board bus bar. Then remove
the bus bar.
6. Use the T6 screwdriver to
remove the five T6 screws
(923-07142) from the
logic board.
7. Use the black stick to move the cables out of the way as you lift the logic board out of the housing.
See also other documents in the category Apple Monitors:
- LED Cinema Display (90 pages)
- LED Cinema Display (100 pages)
- LED Cinema Display (27-inch) (100 pages)
- LED Cinema Display (27 pouces) (104 pages)
- Cinema Display (Stand Replacement) (5 pages)
- AppleVision 850 AV (112 pages)
- Studio Display 17 (ADC) Monitor Stand Replacement (8 pages)
- Cinema Display (21 pages)
- Cinema Display (122 pages)
- Cinema Display (21 pages)
- Multiple Scan 15AV - Display (49 pages)
- Multiple Scan 1705 Display (59 pages)
- Studio Display 15-inch flat panel monitor (38 pages)
- IIc (11 pages)
- Cinema Display, 30" Flat Panel M9179 (6 pages)
- iPod+hp (32 pages)
- AppleVision 750 (114 pages)
- Mac 6400/200 (232 pages)
- Cinema Display, 20" Flat Panel M9177 (6 pages)
- LED Cinema Display (2008) (122 pages)
- Multiple Scan 20 Display (55 pages)
- Mac Monitor (4 pages)
- LED Cinema Display (27-inch) (104 pages)
- LED Cinema Display (27-inch) (64 pages)
- Studio Display (68 pages)
- AppleVision monitors (OS 7.1) (68 pages)
- Multiple Scan 15 Display (45 pages)
- Studio Display (17-inch, CRT) (37 pages)
- AppleVision 1710AV (156 pages)
- Multiple Scan 720 Display (45 pages)
- Multiple Scan 17 Display (43 pages)
- Multiple Scan 14 Display (46 pages)