Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) - Manual (Page 81)

Studio Display
073-00335-A | 81 © 2022 Apple Inc. All rights reserved.
9 Use the T8 screwdriver to
remove the six T8 screws
(923-07143) from the PFC
(Power Factor Controller)
power supply board on the
left.
10. Use the black stick to lift
the left side of the PFC
power supply board from
the housing. At the back of
the board, pinch the levers
at the end of the power cord
port cable. Then slide the
end of the cable out of the
connector. Remove the PFC
power supply board from
the housing.
Power Supply Boards | Removal