Removal – Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) User Manual

Page 109

Studio Display

073-00335-A | 109

Removal

1. Press the power cord

removal tool against the

back of the stand. Create

just enough clearance

between the tool and

stand. Then wrap the power

cord around the tool twice.

2. Hold the cord and the power cord removal tool with the same hand. Ensure that the cord is aligned

with the port. Use your other hand to hold the stand for stability.

Power Cord | Removal

Important

If a support wedge is inserted between the housing and the stand, remove it.

Important

Ensure that the display is

tilted completely downward.

Caution

Ensure that the power cord has a direct line for removal to avoid damaging the pins.

Important

For the VESA mount adapter, lay the housing flat on the table. Hold down the housing for stability.