Reassembly – Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) User Manual

Page 26

Studio Display

073-00335-A | 26

Display (Stand) | Reassembly

Reassembly

1. Place the display adhesive

strips on a flat surface and

check them for damage and

wrinkles. Refer to the part

numbers on the adhesive

strips to identify the correct

position of the adhesive

strips:

• Bottom (946-21413) (1)
• Upper left (946-

21414) (2)

• Upper right (946-

21415) (3)

• Right (946-21416) (4)
• Left (946-21417) (5)

Damaged display adhesive strips can cause cosmetic gaps and light leakage. They can also

weaken the bond between the display and the housing. If the adhesive strips are wrinkled or

damaged, replace them.

Caution

Note: The display adhesive strips have two layers of adhesive with a foam layer between them.

There is a paper release liner on the underside and a plastic release liner on the top. The colors of

the release liners may vary.