Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) - Manual (Page 132)

Studio Display
073-00335-A | 132 © 2022 Apple Inc. All rights reserved.
5. Keep the 20IP bit in the 2.5–25 Nm adjustable torque wrench. Set the torque value to 3.1 Nm.
6. Use the adjustable torque
wrench and 20IP bit to fully
reinstall the five 20IP screws
in the order shown.
7. Remove the two alignment pins. Ensure that the 2.5–25 Nm adjustable torque wrench is still set to
3.1 Nm.
8. Use the adjustable torque
wrench and 20IP bit to
fully reinstall the two 20IP
screws as shown.
• Display (VESA mount adapter)
• Power cord
Reinstall the following parts to complete reassembly:
VESA Mount Adapter | Reassembly