Removal – Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) User Manual

Page 90

Studio Display

073-00335-A | 90

Removal

Cables | Removal

1. Use ESD-safe tweezers

to peel the polyester film

tabs from both ends of the

ambient light sensor flex

cable. Then use the black

stick to flip up the locking

levers and slide the ends

of the flex cable out of the

connectors.

Ensure that the support wedge is between the housing and the stand to keep the housing in place.

Important

2. Use the black stick to peel

the ambient light sensor

flex cable off the display to

remove it.

3. Pinch the sides of the end

of the DisplayPort power

cable and slide it out of the

connector (1).

4. Pull the tab to flip up

the locking bar on the

DisplayPort signal flex

cable (2). Then slide the end

of the flex cable out of the

connector (3).

5. Use the black stick to peel

the DisplayPort power/

signal cable bundle off the

right speaker to remove

it (4).