Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) - Manual (Page 116)

Studio Display
073-00335-A | 116 © 2022 Apple Inc. All rights reserved.
Reassembly
1. Insert the flange into the
stand.
2. Install the two alignment pins
into the flange as shown.
• If you’re installing a replacement Tilt-adjustable stand, use the screws included with the
replacement stand.
• If you’re swapping the removed stand for a Tilt- and height-adjustable stand, follow the steps in the
Tilt- and height-adjustable stand reassembly instructions.
• If you’re swapping the removed stand for a VESA mount adapter, follow the steps in the VESA
mount adapter reassembly instructions.
• If you’re installing a replacement tilt-adjustable stand, use the screws included with the
replacement stand.
• To replace the removed stand with a tilt- and height-adjustable stand, follow the reassembly
steps in Tilt- and Height-Adjustable Stand .
• To replace the removed stand with a VESA mount adapter, follow the reassembly steps in
VESA Mount Adapter .
Important
Tilt-Adjustable Stand | Reassembly