Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) - Manual (Page 97)

Studio Display
073-00335-A | 97 © 2022 Apple Inc. All rights reserved.
Cables | Reassembly
16. Position the camera flex
cable in the housing.
17. Slide one end of the camera
flex cable into the connector
on the logic board. Then use
the black stick to flip down
the locking bar.
18. Run the flat end of the black
stick along the length of the
camera flex cable to adhere
it to the housing.
19. Use the black stick to
position the cable cover
over the cables in the
middle of the housing. Then
press along the edges of the
cable cover to adhere it to
the housing.