Removal – Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) User Manual

Page 113

Studio Display

073-00335-A | 113

Tilt-Adjustable Stand | Removal

Removal

1. Insert the 20IP bit into

the 2.5–25 Nm adjustable

torque wrench. Use the

adjustable torque wrench

and 20IP bit to remove the

two 20IP screws (452-

06708) as shown.

2. Replace the removed screws

with the alignment pins

for stand and VESA mount

adapter.

Ensure that the support wedge is between the enclosure and the stand to keep the display in place.

Ensure that the support wedge is between the enclosure and the stand to keep the display in

place.

Important

Note: If the alignment pins

don’t easily screw in, loosen

the other five 20IP screws.