Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) User Manual

Page 24

Studio Display

073-00335-A | 24

12. Set the display on the

display support stand.

13. Use ESD-safe tweezers to

peel the display adhesive

from the back of the display

edges as shown.

Display (Stand) I Removal

• To prevent damage to the polyester film on the display, don’t peel adhesive residue from the

corners of the display.

• Don’t use ethanol wipes or IPA wipes on the display. Ethanol or isopropyl alcohol may damage

the polyester film.

Caution

10. Pull the tab to flip up the

locking bar (1) on the

camera flex cable. Then

slide the end of the flex

cable out of the

connector (2).

11. Gently wiggle the ends of

the display backlight cables

out of the connectors (3).

If you don’t have a display

support stand, lay the

display facedown on a

clean, soft towel. To avoid

damage to the display,

ensure that the flex cables

don’t touch the towel.

Important