Tilt- and height-adjustable stand, Eps in – Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) User Manual
Page 121
Studio Display
073-00335-A | 121
© 2022 Apple Inc. All rights reserved.
Tilt- and Height-Adjustable Stand
Remove the following part
before you begin:
• Adjustable torque wrench
(2.5–25 Nm)
• Alignment pins for stand
and VESA mount adapter
• Flathead screwdriver
• Support wedge for tilt- and
height-adjustable stand
• Torx Plus 20IP 70 mm bit
Tools
Tilt- and Height-Adjustable Stand | Before You Begin
Before You Begin
Danger
Ensure that the power cord is not plugged into an electrical outlet.
Caution
Some images show the power cord removed from the display, but during this procedure the power
cord should remain connected to the display.
•