Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) - Manual (Page 107)

Studio Display
073-00335-A | 107 © 2022 Apple Inc. All rights reserved.
Ensure that the notches
on the bus bar align with
the openings in the power
supply boards.
Important
13. Position the power supply
bus bar on the power supply
boards. Then use the T6
screwdriver to partially
reinstall the two T6 screws
(923-07141) into the bus
bar.
14. Insert the Torx T6 bit into
the 10–34 Ncm adjustable
torque driver. Set the torque
value to 20.5 Ncm.
15. Use the adjustable torque
driver and Torx T6 bit to fully
reinstall the two T6 screws.
• Power cord
• Display (stand) or display (VESA mount adapter)
Reinstall the following parts to complete reassembly:
Power Cord Port | Reassembly