Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) User Manual

Page 80

Studio Display

073-00335-A | 80

6. Starting with the DC power

supply board on the right,

use the T8 screwdriver to

remove the six T8 screws

(923-07143). Then remove

the DC power supply board.

Power Supply Boards | Removal

7. Use ESD-safe tweezers to

peel back the polyester film

tab on the power supply

signal flex cable.

8. Use the black stick to flip up

the locking lever. Then slide

the end of the power supply

signal flex cable out of the

connector.

If you’re replacing the

power supply boards,

continue to step 7. If you’re

removing the power supply

boards for a different

procedure, skip to step 9.

Important