Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) - Manual (Page 38)

Studio Display
073-00335-A | 38 © 2022 Apple Inc. All rights reserved.
7. Pull the tab to flip up
the locking bar on the
DisplayPort signal flex cable
(1). Then slide the end of
the flex cable out of the
connector (2).
Display (VESA mount adapter) | Removal
The DisplayPort signal flex
cable has a small area of
adhesive that adheres to
the back of the display.
If the flex cable is still
adhered to the back of the
display, use the black stick
to release it.
Important
9. Pull the tab to flip up the
locking bar (1) on the
camera flex cable. Then
slide the end of the flex
cable out of the
connector (2).
10. Gently wiggle the ends of
the display backlight cables
out of the connectors (3).
8. Slide the end of the
DisplayPort power cable out
of the connector (3).