Removal – Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) User Manual

Page 49

Studio Display

073-00335-A | 49

Ensure that the support wedge is between the housing and the stand to keep the display in place.

Important

Removal

1. Pinch the sides of the

ends of the five cables

and slide them out of the

connectors (1).

Logic Board | Removal

2. Pull the tabs to flip up the

locking bars on the two flex

cables (2). Then slide the

ends of the two flex cables

out of the connectors.

3. Use ESD-safe tweezers to

peel back the polyester film

tabs on the three locking

lever connectors (3). Use

the flat end of the black

stick to flip up the three

locking levers. Then slide

the three flex cables out of

the connectors.

4. Use the flat end of the black

stick to press and hold

the “PUSH” button on the

zero-insertion force (ZIF)

connector (4) and use ESD-

safe tweezers to slide the

end of the flex cable out of

the connector.