Removal – Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) User Manual

Page 36

Studio Display

073-00335-A | 36

Display (VESA mount adapter) | Removal

Removal

1. Place the display flat on

the large foam blocks with

the display faceup. Cut

the display adhesive strips

by inserting the adhesive

cutter between the display

and the housing. Start from

a corner, and move the

wheel around the edges of

the display.

2. Move your fingers along the edge of the display to check that the adhesive has been sufficiently cut.

If the adhesive is not completely cut, use the adhesive cutter to cut any remaining adhesive.

3. Stand up the display with the top of the housing (camera side) on the table.

4. Place the support tilt wedge

and support lift wedge in

front of the display.