Epson SureLab D1070 Professional Minilab Printer - Manual (Page 93)

SL-D1000 Series User's Guide
Using the Maintenance Tool (Windows)
93
If the clogged nozzles are not cleared by
executing
Normal cleaning, execute Normal
cleaning again. If the clogged nozzles are not
cleared even by repeating this several times,
execute
Power cleaning.
If the clogged nozzles are not cleared even by
executing
Power cleaning, contact service
support.
Print Head Alignment Method
If the print results appear grainy or out of focus,
perform Print Head Alignment. The Print Head
Alignment function corrects print head misalignments
when printing.
1 Load paper to print an adjustment pattern.
U “Basic Operations” on page 29
2 Click Printer settings on the main screen.
See the following for more details on the main
screen.
U “Explanation of the Main Screen” on page
81
3
Select a printer, in the printer list area on the top
of the Printer settings screen, on which to
execute Print Head Alignment, and then select
Paper Settings .
You cannot select multiple printers.
See the following for more details on the printer
settings screen.
U “Explanation of the Printer settings” on
page 82
4 In Paper Source , select the paper source in
which you loaded paper in step 1.
If you selected Rear Paper Feed Slot for Paper
Source , then go to step 5.
If you selected something other than Rear
Paper Feed Slot for Paper Source , then go to
step 6.
5
In Paper Type , select the type of paper that is
loaded in the rear paper feed slot.
6 Click Print in Print Head Alignment .
Adjustment patterns are printed.
7 Check the printed adjustment pattern.
Two groups of adjustment patterns, #1 and #2,
are printed. Confirm which of the print pattern
numbers has no gaps between the nozzles in
each group.
8
Select the number of the print pattern you
confirmed, and then click
Set .
Select the number of the print pattern you
confirmed individually for both
#1 and #2 .
The adjustment values are applied.