Epson SureLab D1070 Professional Minilab Printer - Manual (Page 71)

SL-D1000 Series User's Guide
Maintenance
71
2
Wipe off any dirt, such as paper dust, on the
platen (the area outlined in blue in the
illustration below) with a commercially
available cotton swab.
3 Wipe off any dirt, such as paper dust, that has
accumulated on the ink absorbing areas (the
area outlined in blue in the illustration below)
with a commercially available cotton swab.
Be careful as you wipe the ink off the ink
absorbing area so that the ink does not spread to
any other areas.
4 Install the printer cover in the reverse order of
step 1.
How to Clean the Roll Paper Unit
1 Open the front plate inside the roll paper unit.
Place your finger in the hole at the bottom and
lift to open.
(
1
) Open the rear paper feed slot cover.
(
2
) Slide the printer cover backwards, and then
remove it.