Epson SureLab D1070 Professional Minilab Printer - Manual (Page 146)

SL-D1000 Series User's Guide
Problem Solver
146
1
Remove the scrap paper box.
2
Pull out the roll paper unit.
3
Turn the handle on the left side of the roll paper
unit in the direction of the arrow to rewind the
roll paper.
Rewind the roll paper until the leading edge
appears at the paper slot.
If it does not rewind, use scissors or something
to cut the roll paper near the paper slot.
4
If the leading edge of the roll paper is ragged, cut
it in a straight line with a pair of scissors or
something.
Cut the paper as straight as possible.
c
Important:
If you cannot pull out the roll paper unit, do
not forcibly pull it out. Paper may be
jammed inside. Refer to the next section to
check for paper jams in the back cover of the
duplex feeder, platen, and paper feed unit,
and remove any jammed paper.