Epson SureLab D1070 Professional Minilab Printer - Manual (Page 148)

SL-D1000 Series User's Guide
Problem Solver
148
If there is a jam, remove the paper slowly.
10
Replace the front and rear plates.
Press down until you hear it click into place.
11
On the control panel screen, press the Z
button.
The error is canceled and the home screen is
displayed.
12 If there is a print job, press the button to
cancel the job.
13 Reload the roll paper.
See the following for the procedure to load the
roll paper.
U “How to Replace Roll Paper” on page 30
14 Confirm that the status light is off.
Paper is Jammed in the Paper Feed
Unit
Follow the steps below to solve the problem.
Checking for jammed paper
1 If the duplex feeder is installed, open the rear
cover.
2 Remove the paper feed unit.
3
Check for jammed paper and paper scraps.
Removing jammed paper (roll paper)
1 Cut the jammed paper with scissors or
something.