Epson SureLab D1070 Professional Minilab Printer - Manual (Page 21)

SL-D1000 Series User's Guide
Before Use
21
Note the following points when handling paper.
O Use Epson special media under normal room conditions (temperature: 15 to 25 °C, humidity: 40 to 60%).
O Do not fold the paper or scratch the surface of the paper.
O Avoid touching the printable surface of the paper with your bare hands. Moisture and oil from hands can have
an adverse effect on the print quality.
O Handle paper by the edges of the paper. We recommend wearing cotton gloves.
O Do not throw away the paper packaging as you can use it for storing the paper.
O If roll paper is left loaded on the printer, the leading edge of the paper may curl and print quality may decline.
We recommend removing roll paper from the printer when it is not in use.
Paper that cannot be used
Do not load paper as described below. Doing so could cause paper jams and dirty printouts.
Notes before Loading Paper
When using the duplex feeder (option), before loading paper in the cassette, carefully riffle the stack of paper so the
sheets do not stick together, and then align all four edges.
How to riffle U “Loading in the Cassette (Option)” on page 36
O Paper that is wavy
O Paper that is torn
O Paper that is cut
O Paper that is too thick
O Paper that is too thin
O Paper that is hard
O Paper that has folded corners
O Paper that is creased
O Paper that has been rolled up
O Paper that has been folded
O Paper on which stickers, etc., have
been stuck
O Paper that is damp