Settings on windows – Epson SureLab D1070 Professional Minilab Printer User Manual
Page 57
SL-D1000 Series User's Guide
Printing Using Various Print Functions
57
The paper sizes you can set are shown below.
Roll Paper
*Although you can set 3.5 to 8.26 inches (89 to 210 mm) in
Mac, paper sizes that are not supported by this printer
cannot be printed correctly.
Cut sheet
Settings on Windows
1
Open the printer driver's
Main
screen, and then
select
Media Type
and
Paper Source
.
See the following for how to display the
Main
screen.
U
“Basic Printing Methods (Windows)” on
2
Select
User-Defined
for
Paper Size
.
3
On the
User-Defined Paper Size
screen, enter
Paper Size Name
, set a paper size to use, and
then click
Save
.
4
Click
OK
.
You can now select the saved paper size from
Paper Size
in the
Main
screen.
You can now print as normal.
Width
*
3.5, 4, 5, 6, 8, 8.26 inches
(89.0, 101.6, 127.0, 152.4, 203.2, 210.0 mm)
Length
1.96 to 39.3 inches (50 to 1,000 mm)
Width
Printing with margins: 3.5 to 8.26 inches
(89 to 210 mm)
Borderless printing: 3.5, 4, 5, 6, 8, 8.26
inches (89.0, 100.0, 101.6, 127.0, 152.4,
203.2, 210.0 mm)
Length
Single-sided printing: 5.8 to 39.3 inches
(148 to 1000 mm)
Double-sided printing: 15.8 to 11.7 inches
(48 to 297 mm)
c
Important:
Output sizes may be restricted by the application
being used for printing.
Note:
O
To change the information you saved, click
the Paper Size Name in the list on the left side
of the screen.
O
To delete a paper you saved, select the Paper
Size Name in the list on the left side of the
screen, and then click
Delete
.
O
You can save up to 30 paper sizes.