Epson SureLab D1070 Professional Minilab Printer - Manual (Page 29)

SL-D1000 Series User's Guide
Basic Operations
29
Basic Operations
Notes When
Loading/Replacing Paper
Notes when Loading Roll Paper
Do not load roll paper if the left and right edges are
uneven
Loading roll paper whose left and right edges are
uneven, will cause paper feeding problems. Align the
edges before using it or use a roll of paper that has no
such issues.
Repeatedly winding and unwinding the same roll
paper on the spindle unit may tend to make the left and
right ends uneven.
When removing roll paper, do not allow the paper to
become loose, and when loading it, keep the left and
right edges even.
Do not load roll paper if the leading edge is ragged.
If the leading edge of the roll paper is ragged, cut it
straight with a pair of scissors, or something, and then
load it.
!
Caution:
O Do not rub the edges of the printing paper
with your hand. The edges of the paper are
thin and sharp and could cause an injury.
O When opening and closing the covers, do not
place your hands near the points where the
main unit and the cover join. If your fingers
or hands are trapped, an injury could occur.
O When moving the roll paper unit in or out,
grip the handle. If you place your hands into
any other sections, either side of your hand or
fingers could be injured.