Epson SureLab D1070 Professional Minilab Printer - Manual (Page 153)

SL-D1000 Series User's Guide
Problem Solver
153
5 Move to the front, and remove the scrap paper
box.
6
Pull out the roll paper unit.
7
Turn the handle on the left side of the roll paper
unit in the direction of the arrow to rewind the
paper.
Rewind the paper until the leading edge appears
at the paper slot.
If it does not rewind, use scissors or something
to cut the roll paper near the paper slot.
8 Move to the rear side, and install the printer
cover.
9 Install the paper feed unit.
c
Important:
After cutting the paper, do not pull paper at
the rear side out through the upper side.
Follow the steps below to remove paper from
the rear side.