Epson SureLab D1070 Professional Minilab Printer - Manual (Page 87)

SL-D1000 Series User's Guide
Using the Maintenance Tool (Windows)
87
Paper Settings tab
The configuration and functions of the Paper Settings tab in the Printer settings screen are shown below.
C
Nozzle Check before printing Set whether to execute auto nozzle check before printing.
When set to Auto , auto Nozzle Check is executed according to the state of the
printer, such as after changing the auto nozzle check settings, or after executing
nozzle cleaning.
When set to Every time , auto nozzle check is executed for each print job.
D
Periodic Check Set the time to execute auto nozzle check according to the number of sheets
printed.
If the number of sheets being printed for a single job exceeds the number of
printed sheets set for this item, then the number of sheets for that job is printed,
after which auto nozzle check is executed.
E
Nozzle Compensation Set the print quality for when normal nozzles compensate for the ink that could not
be ejected by clogged nozzles.
F
Auto Cleaning Sets the number of times to do auto cleaning when clogged nozzles are detected.
G
Action when printing trouble is
detected Sets whether to stop printing when clogged nozzles are detected.
When set to Stop Immediately , printing is stopped when clogged nozzles are
detected.
When set to Ignore , printing is continued even if clogged nozzles are detected.
H Set button Clicking this reflects the changes to each item B to G .
Item Functions
A
Paper Source Select the paper source for doing Print Head Alignment and Paper Feed
Adjustment.
B Paper Type This is enabled only when Rear Paper Feed Slot is selected for Paper Source ( A ).
Select the type of paper that is loaded in the rear paper feed slot.
C Print Head Alignment Corrects print head misalignments when printing.
See the following for details on Print Head Alignment.
U “Print Head Alignment Method” on page 93
Item Functions