Epson SureLab D1070 Professional Minilab Printer - Manual (Page 23)

SL-D1000 Series User's Guide
Before Use
23
O Store ink supply units that are removed before all the ink has been used so that dust does not get on the ink
supply ports. The ink supply port has a valve in it so it does not need to be capped.
O Removed ink supply units may have ink around the ink supply port, so be careful not to get any ink on the
surrounding area.
O Do not touch the IC chip of the ink supply unit. Doing so may prevent normal operation and printing.
O Do not subject ink supply units to extreme shock, such as by dropping them. Ink may leak from the ink supply
units.
O Even while nothing is printed, the printer uses ink from all ink supply units during head cleaning and other
maintenance operations to keep the print head in good condition.
O Although the ink supply units may contain recycled materials, this does not affect printer function or
performance.
O Do not leave the printer without ink supply units installed. The ink in the printer may dry and the printer will
not print correctly. When you are not using the printer, make sure there is an ink supply unit installed in each
slot.
O Load all colors of ink supply units. You cannot print unless all the colors are loaded.
O To maintain the quality of the head, the printer stops printing before the ink supply units are completely
expended; therefore, some ink is left in used ink supply units.
O Do not dismantle or modify ink supply units. You may not be able to print properly.
Introducing the Software
Install the printer driver and Maintenance Tool on your computer to use the printer.