Epson SureLab D1070 Professional Minilab Printer - Manual (Page 33)

SL-D1000 Series User's Guide
Basic Operations
33
When doing this, confirm that there are no gaps
between the media edge guides and the roll
paper.
5 Insert the media edge guide into the side
opposite to the shaft of the spindle unit, and
firmly clamp the roll paper between the media
edge guides.
6
Confirm that there are no gaps between the
media edge guide and the roll paper, lower the
knob, and then secure the media edge guide.
Installing the Spindle Unit
1 Load the spindle unit into the roll paper unit.
Position the gear on the end of the spindle on
the right side.
Check that the shaft of the spindle unit fits into
the bearing and that the gears engage.
2
Insert the leading edge of the roll paper into the
paper slot until you hear a beep.