Epson SureLab D1070 Professional Minilab Printer User Manual
Page 173
SL-D1000 Series User's Guide
Appendix
173
Storage temperature
Stored in packaging:
−
4 to 104 °F (
−
20 to 40 °C) (4 days or less at 4 °F
(−
20 °C), 1 month or less at
104 °F [40 °C])
Installed in printer:
−
4 to 104 °F (-20 to 40 °C) (4 days or less at
−
4 °F [
−
20 °C], 1 month or less at
104 °F [40 °C])
Transported in packaging:
−
4 to 140°F (
−
20 to 60 °C) (4 days or less at
−
4 °F [
−
20 °C], 1 month or
less at 104°F [40 °C], 72 hours or less at 140°F [60 °C])
Capacity
250 ml
Dimensions
3.19 (W) x 10.37 (D) x 1.27 (H) inches (81 (W) x 263.3 (D) x 32.3 [H] mm)
c
Important:
O
The ink freezes if left at below 14 °F (-10 °C) for a long time. If it does freeze, leave it at room temperature (77 °F
[25 °C]) for at least three hours until it has defrosted (without condensation).
O
Do not disassemble ink supply units or refill them with ink.
General Specifications
Temperature
Operating:
50
to 95 °F (10 to 35 °C)
Storage (before unpacking):
−
4 to 140 °F (
−
20 to 60 °C) (within 120 hours at 140 °F [60 °C], one
month at 104 °F [40 °C])
Storage (after unpacking):
−
4 to 104 °F (
−
20 to 40 °C) (within one month at 104 °F [40 °C])
Humidity
Operating: 20 to 80% (without condensation)
Storage (before unpacking): 5 to 85% (without condensation)
Storage (after unpacking): 5 to 85% (without condensation)
Weight
Main unit: 38.8 lbs (17.6 kg) (ink not included)
Dimensions
Main unit: 18.1 (W) x 14.7 (D) x 13.5 (H) in (460 [W] x 374 [D] x 343 [H] mm)
U
Installed software version
E1.1930.0001
Duplex feeder Specifications
Paper Width
3.5 to 8.3 in (89 to 210 mm)
Paper Height
5.8 to 11.7 in (148 to 297 mm)
Paper Thickness
0.0078 to 0.01 in (0.20 to 0.265 mm)
Weight
10.8 lbs (4.9 kg)
Dimensions
18.1 (W) x 16.9 (D) x 14.4 (H) in (460 [W] x 428 [D] x 365 [H] mm)
!
Warning:
This is a class A product. In a domestic environment this product may cause radio interference in which case the
user may be required to take adequate measures.
Ink Specifications