Epson SureLab D1070 Professional Minilab Printer - Manual (Page 154)

SL-D1000 Series User's Guide
Problem Solver
154
10
If the duplex feeder is installed, close the rear
cover.
11 Move to the front, and on the control panel
screen, press the
Z button.
The error is canceled and the home screen is
displayed.
12
If there is a print job, press the button to
cancel the job.
13
Reload the roll paper.
See the following for the procedure to load the
roll paper.
U “How to Replace Roll Paper” on page 30
14 Confirm that the status light is off.
Removing jammed paper (cut paper)
1 Remove jammed paper.
Remove it slowly to the rear.
If you have pulled out the paper, go to step 3.
If the paper is under the print head and cannot
be easily removed, go to the next step.
2 Move the print head unit manually, and remove
the paper towards the rear.
Move the print head unit to the left or right to
the edge of the paper.