Epson SureLab D1070 Professional Minilab Printer - Manual (Page 31)

SL-D1000 Series User's Guide
Basic Operations
31
6
Remove the spindle unit.
Do not lift the spindle unit by the knobs when
removing it. The roll paper could fall.
Removing the Roll Paper
1
Raise the knob and remove the left-side media
edge guide.
2
Raise the knob and remove the right-side media
edge guide and the spindle.
Attaching the Roll Paper
Attach the roll paper so it is in the center of the spindle
unit. Follow the steps below to attach it.
1
Remove the new roll paper from its packaging,
and stand it on end on a flat surface. Next, wipe
the end of the roll paper with a soft cloth several
times to remove any dirt, such as paper dust.
Place the roll paper so the leading edge is facing
as shown in the illustration below.
2 Raise the knob on the media edge guide and
place it on the roll paper.
Press it in until there is no gap between the
media edge guide and the roll paper.