Epson SureLab D1070 Professional Minilab Printer - Manual (Page 151)

SL-D1000 Series User's Guide
Problem Solver
151
Checking for jammed paper
1 If the duplex feeder is installed, open the rear
cover.
2 Remove the paper feed unit.
3
Remove the printer cover
Slide the printer cover backwards, and then
remove it.
4
Check for jammed paper and paper scraps.
Removing jammed paper (roll paper)
1 If a lot of paper has been ejected from the front
of the printer, cut the paper in front of the jam
with a pair of scissors or something.
2 Slowly pull out, towards the rear, the remaining
paper jammed at the top side.
If you have pulled out the paper, go to step 4.
If the paper is under the print head and cannot
be easily removed, go to the next step.
3
Move the print head unit manually, and remove
the paper towards the rear.